WAGO 221-413 pack of 50: 3-conductor lever splicing connectors for up to 4 mm²

Compact lever connectors for three conductors from 0.14 to 4 mm² – for solid, stranded and fine-stranded wires, no tools needed to operate them.

Connects 3 conductors from 0.14 to 4 mm²

For solid, stranded and fine-stranded wires

Rated 450 V / 32 A according to the WAGO data sheet

11 mm strip length

Transparent housing for visual checks

Pack of 50

The WAGO 221-413 belongs to the 221 COMPACT series and is a splicing connector for three conductors. Instead of twisting wires together or tightening screw terminals, you lift the orange lever, insert the stripped wire and close the lever again. Apart from a wire stripper you don't need any tools, and the connector can be opened again later.

The big advantage over push-in connectors without levers: the 221 series takes every type of conductor. According to the WAGO data sheet, solid and stranded wires from 0.2 to 4 mm² fit, as well as fine-stranded wires from 0.14 to 4 mm². That means you can join, for example, the rigid installation cable from the wall to the flexible cord of a lamp. The strip length is 11 mm.

The transparent housing shows whether the wire is fully inserted. The connector is rated for 450 V and 32 A and, according to the manufacturer, can be used at ambient temperatures up to 85 °C. At 18.7 × 8.3 × 18.6 mm it's compact enough for tight flush-mounted boxes. The pack contains 50 pieces, enough for several lamp or junction box connections.

Worth knowing: in Germany, work on fixed household wiring is a job for a qualified electrician. Always isolate the circuit and verify it's dead before you start. Only one wire goes into each clamping point; for more than three conductors there's, for example, the five-conductor 221-415.